Hydro-Jetting Drain Cleaning | High-Pressure Pipe Wall Restoration

We match the hose size to the specific application, ensuring maximum power and pipe protection:

• 1/4 Size Hose (Main Lines):This is our primary hose for cleaning standard 100mm pipes (including UPVC, Terracotta, and Cast Iron sewer lines). It is also used for clearing larger Stormwater Drains (DN150 – DN225), such as those connecting below-ground pits in driveways.
• 1/8 Redflex Whip Hose (Branch Lines):This specialized, smaller diameter hose is used for clearing narrow or complex branch drains (such as 40mm basin waste pipes and 50mm kitchen waste pipes). The 1/8 size is essential for 90mm UPVC pipe systems, as it can travel further through the much sharper angle bends than the larger 1/4 hose.

We do not consider the job complete until the pipe walls are fully restored. Our process involves using the CCTV drain camera to visually inspect the pipe walls after jetting, guaranteeing the drain is running at maximum efficiency.

• Targeting Roots:The CCTV visuals allow our plumbers to focus on specific drain sections affected by tree roots. We use a twisting of the hydro pressure hose technique to strategically position the tree root cutting head at different angles within the pipe. This ensures the roots are cut around the full diameter of the drain, not just a small channel.
• Final Quality Check:We use the CCTV in conjunction with the high-pressure jet to confirm the drain is completely free from defects after the clearing. We provide the client with before-and-after footage on the CCTV monitor, so they can visually see the obstruction and confirm the clean result.